3980xpi Users Manual - Data I/O Corporation

Summary of Extended CRC Commands
Command Description Response
Computer Remote Control
01] Display system configuration SSSS/AAAA/MM/PP/II/JJ>
nn02] Set upload wait time >
n03] Set device ID verify option HHHHHHHH> or >
nn04] Set Remote port baud rate >
xxx...xxxx05] Set host command >
n06] Select data bits >
n07] Set next set member >
xx09] Set set size >
nn22] Set data word width >
n23] Select number of verify passes >
n24] Select security fuse programming >
n26] Specify logic verify options >
n27] Set/clear enable/disable sec. fuse >
n28] Fill fuse map >
n29] Set reject count option >
hhh2A] or hh2A] Enable programming options >
hhh2B] or hh2B] Disable programming options >
nhh2C] Select memory fill option >
hh2D] Vector test options >
2F] Return 8-character sumcheck HHHHHHHH>
xxx...xxxx30] Set data file name >
n31] Set data source/destination >
xxx...xxxx33] Select device manufacturer >
xxx...xxxx34] Select device part number >
xxx...xxxx38] Load file from disk >
xxx...xxxx3B] Delete disk file >
n3C] Set data transfer port >
xxx...xxxx3E] Select Keep Current algorithm >
39] Delete all RAM files >
n40] Upload device information See Application Note
n41] Perform self-tests and upload results AAA...AA>
43] Upload yield tally See Application Note
46] Clear yield tally >
49] Suspend CRC mode Displays terminal screen
n4A] Get filename from disk AAA...AA>
n4D] Select algorithm type (0,1,2,3) >
n4F] Set RAM device selection >
n52] Select algorithm source for floppy disk >
(MSM not available)
3980xpi/3980/3900/2900 User Manual B-7