3980xpi Users Manual - Data I/O Corporation

Self-test
Serial Set
Glossary
A built-in self-diagnosis command that allows you to test various circuits and
subsystems in the programmer, verifying proper operation or isolating possible
problem areas.
A method of set programming in which the devices of the set are programmed
one at a time instead of all at once.
Serial Test Vector Application
The process of applying test vectors in a serial fashion, one input at a time.
Serial Vector Test
Set Programming
SIMM
SmartPort
SOIC
Source
SSOP
A device test that applies test vector input states serially, starting with pin
one and stepping through the remaining pins. This test is a diagnostic tool
designed to help debug and classify test vector failures. Specifically, this test
is designed to isolate test vectors that are sequence dependent.
A type of programming in which a large data file is partitioned and
programmed into multiple memory devices.
An Acronym for Single Inline Memory Module, a type of device package.
A rectangular device with leads on one long edge.
A feature of the programmer that automatically detects and adjusts the
programmer to the presence of DCE/DTE protocol.
An acronym for Small Outline Integrated Circuit, a type of device package.
A rectangular device with gull-wing leads on the long sides. SOP is Small
Outline Package. SO is Small Outline.
The place from which something is being sent, usually data. It can be sent to
RAM, a disk file, or one of the programmer's serial ports.
An acronym for Shrink Small Outline Package, a type of device package.
An SOP with more leads at higher and finer pitch. Also called TSOP II.
Status Window
The top three lines of the screen. The following information is displayed in the
status window: the name of the data file, the amount of user RAM, the version
numbers of the algorithm/system disk, the device manufacturer and part
number, the family/pinout code, and the data translation format.
3980xpi/3980/3900/2900 User Manual D-11