3980xpi Users Manual - Data I/O Corporation

Session 4: Selecting a Keep Current Algorithm
Getting Started
This Session describes how to select a device that is supported by a Keep
Current algorithm you downloaded from the Data I/O Web site or the Keep
Current Bulletin Board System (BBS). See Appendix C for more information.
The Keep Current algorithm(s) should be on a 3.5-inch disk formatted in your
programmer.
Note: The device you use may not have the same capabilities as the
device used in this Session.
Insert the Keep Current Algorithm Disk
Insert the 3.5-inch disk containing the Keep Current algorithm(s) into the
programmer disk drive.
Select the Keep Current Option
The device selection process is a two-step process: first the programmer
displays a list of the available Keep Current algorithms, then you select the
algorithm.
From the Main Menu (press F1 to return to the Main Menu), choose the Select
Device command. (Either press S or move the cursor to the Select Device
menu item and press ENTER.) The Manufacturer List screen is displayed.
Figure 3-7. Device Manufacturer Selection Screen
Find the KEEP CURRENT entry, enter the number next to it, then press ENTER.
The Keep Current Part List screen is displayed (see Figure 3-8).
Note: The Device Type filter has no effect on the devices displayed
when you select Keep Current devices.
3980xpi/3980/3900/2900 User Manual 3-17