3980xpi Users Manual - Data I/O Corporation

Figure 3-9. Locking and Unlocking a Device
Set the Parameters
SOCKET LEVERS
UNLOCKED
PIN 1
SOCKET
LEVERS
LOCKED
Getting Started
After you select the device type and lock the master device in the socket,
choose Load Device from the Main Menu. The Load Memory Device
parameter screen is displayed (see Figure 3-10).
Figure 3-10. Load Memory Device Screen (Non-default Parameters)
One of the following two Load Memory Device screens is displayed:
� The Non-default Parameters screen (the default screen) displays a
subset of the Load parameters supported by the selected device (see
Figure 3-10). Usually these are the only parameters you need to set.
� The All Parameters screen displays all the Load parameters supported by
the selected device (see Figure 3-11). When you perform more
complicated operations, such as loading only part of the device data, you
will change some of the parameters on this screen.
3980xpi/3980/3900/2900 User Manual 3-21
0548-2