3980xpi Users Manual - Data I/O Corporation
3980xpi Users Manual - Data I/O Corporation
3980xpi Users Manual - Data I/O Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting Up<br />
4. Move the cursor to the High Speed Download field, then press Y. The<br />
programmer displays: Hit return to switch user menu port, ^Z<br />
to abort.<br />
5. Press ENTER. You will see no response on the screen.<br />
The User Menu Port parameter is set to R, which configures the<br />
programmer to send its user interface data to the Remote port. The<br />
Terminal port is the factory default for the User Menu Port. (User interface<br />
data includes screens, menu information, and online Help.<br />
6. Move the cable connecting the programmer and the PC from the Terminal<br />
A port to the Remote port.<br />
The Terminal LED should go out and the Remote LED be lit. If the Remote<br />
LED does not light, turn off the programmer, reconnect the PC cable to the<br />
Terminal port, then return to step 1.<br />
7. Press CTRL+R to redisplay the Communication Parameters screen.<br />
If this screen is not displayed, turn off the programmer, reconnect the PC<br />
cable to the Terminal port, then return to step 1.<br />
8. Press F1 to display the Main Menu, then continue with the next step.<br />
If the Main Menu is not displayed, turn off the programmer, reconnect the<br />
PC cable to the Terminal port, then return to step 1.<br />
High Speed Download is now enabled for this session.<br />
Changing the Powerup Defaults<br />
If you do not save the changes you made, you can use High Speed Download<br />
for the current session but you must repeat the procedure to enable it the next<br />
time you turn on the programmer.<br />
To make High Speed Download part of your powerup defaults, follow the steps<br />
below (for the complete list of powerup defaults, see page 4-3).<br />
1. From the Main Menu, press M C S to display the Save System<br />
Parameters screen. Up to ten configuration files are displayed.<br />
2. Press 1 ENTER. The programmer displays: Parameter Entered.<br />
3. Press ENTER to save the current settings as the Powerup Defaults. The<br />
action symbol rotates as the programmer saves the settings.<br />
When finished, the programmer displays the following message:<br />
System parameters saved.<br />
High Speed Download will now be available whenever you turn on the<br />
programmer.<br />
To learn how to download files to the programmer using High Speed Download,<br />
see the tutorial Session on page 3-26.<br />
<strong>3980xpi</strong>/3980/3900/2900 User <strong>Manual</strong> 2-21