Press Matcher Web User Manual - image2output - Support

Spot Color Simulation
Step 5: Add Spot Colors
http://www.image2output.com
• Color exchange format files (*.CXF)
// WEB«
These are files with an XML-based format for exchanging color
information. ORIS Press Matcher⁄⁄Web supports *.CXF files with
Lab and spectral data. You have to select the sample set to be
used.
2. From the IMPORT SPOT COLORS dialog (see Fig. 15-5), select the colors
to be imported. Do this as follows:
• Double-click to add a single spot color. Then click CANCEL.
• To add multiple colors, CTRL-click or SHIFT-click the colors you
want, then click IMPORT SELECTED.
• To add all colors, click SELECT ALL (CTRL+A) and then IMPORT
SELECTED.
The selected spot colors are added to the SPOT COLOR CORRECTION
dialog (see Fig. 15-6).
3. Repeat these steps to import spot colors from additional files. Then
click SAVE to save the spot color correction file (*.SCG).
4. If you feel that the device colors do not match the original colors
closely enough, you can fine-tune them (see Step 7).
PANTONE® * and HKS spot color libraries reside in the installation
path …\Program Files\CGS\Common Files\CC\.
* PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.
15-6 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com