Press Matcher Web User Manual - image2output - Support

Spot Color Simulation
Step 7: Optimize Spot Colors
http://www.image2output.com
// WEB«
4. You can round the CMYK colors to integer values.
To do so, make sure the CMYK channels to be
modified have check marks, then click the
SMOOTHEN button.
Decimal places between 0.1 and 0.4 are rounded
down, decimal places between 0.5 and 0.9 are
rounded up. Values lower than 2 are rounded to 0,
values greater than 98 are rounded to 100.
5. Click RESET CMYK if you want to restore the original CMYK values.
6. Click or if you want to optimize additional spot colors. This
applies the changes and loads the previous or next spot color, respectively.
Repeat the process described above (from step 2).
The buttons are displayed as
selected spot color.
or if you have not modified the
7. Click OK to close the dialog, then save the SCG file. Use CANCEL to
close the dialog if you have clicked or beforehand.
Fig. 15-15 ‘Manual Spot Color Input’ Dialog
Optimizing Single Spot Colors (Visually)
1. In the SPOT COLOR CORRECTION dialog (see Fig. 15-6), double-click
on a spot color name, or select a spot color and click on CHANGE.
The MANUAL SPOT COLOR INPUT dialog appears (see Fig. 15-15).
15-18 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com