Press Matcher Web User Manual - image2output - Support

Update Fiery Print Server
http://www.image2output.com
6 EFI Fiery RIP
Make sure to use the latest version of the Fiery print server, Command
WorkStation and the printer driver.
When updating individual components of Command WorkStation, make
sure to select all components that should be updated or kept on your
computer. All components that are not selected will be uninstalled.
Always use the original PostScript printer driver of the printer manufacturer.
PCL drivers are not suitable for ORIS Press Matcher⁄⁄Web, as they
do not provide color management with CMYK data.
Connect to Fiery Print Server
Start Fiery Command WorkStation and connect to the Fiery print server.
If the print server is not listed, add it to the list:
1. Click .
2. Enter the printer’s IP address, then click CONNECT.
3. Log in as ADMINISTRATOR and enter the password.
If the print server is listed:
1. Select the server from the list.
2. Click to connect to it.
3. Log in as ADMINISTRATOR and enter the password.
ORIS Press Matcher⁄⁄Web Version 1.1 Fiery and Creo RIP Settings 6-1
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com