Press Matcher Web User Manual - image2output - Support

Color-Matched File Output
Creating File Output Queues
Apply Color Correction to Test Chart
// WEB«
Click CONTINUE. Now the color correction defined by the ORIS_DAT file
is applied to the test chart. A message appears indicating where the
transformed test chart has been saved to.
Print Test Chart
Print the transformed test chart on the target device, i.e. the high-volume
digital press or grand-format printer, for example.
The device must have warmed up sufficiently to produce stable results.
It is therefore advisable to print 5 or more copies of the test chart.
Measure Test Chart
http://www.image2output.com
Measure the test chart printed next to last. The following assumes that
the test chart is measured using an Eye-One iO scanning table.
1. Select I WANT TO MEASURE THE TEST CHART.
2. Place the test chart on the electrostatic mat.
3. Click on START MEASUREMENT.
4. Measure the three chart reference points.
Position the visor on the A1 color patch (top left) and click the instrument
button. Measure the patch on the bottom left and bottom right
in the same way. The other patches are scanned automatically now.
5. Click NEXT when the measurement process has completed.
2-6 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com