Press Matcher Web User Manual - image2output - Support

EFI Fiery RIP
Make Print Settings
Color Setup
1. Set the color management options as follows:
CMYK/GRAYSCALE NONE (= bypass the CMYK simulation profile)
RGB, LAB NONE
SPOT COLOR Disable
http://www.image2output.com
GRAY AND BLACK OFF (both options)
OUTPUT PROFILE Select the output profile you have created (see
page 6-2)
// WEB«
2. Click on EXPERT SETTINGS. The options shown above are displayed
again. Make sure they are set in the same way. There are also additional
options which should be set as follows:
SEPARATE RGB/LAB TO CMYK SOURCE Disable
BLACK TEXT AND GRAPHICS NORMAL
USE MEDIA DEFINED PROFILES IF AVAILABLE Disable
6-8 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com