Press Matcher Web User Manual - image2output - Support

Miscellaneous
Modifying Paper White Simulation
http://www.image2output.com
// WEB«
1. Iterative printer calibration:
Calibrate all printers to the same reference printer (RFP file).
2. Iterative color matching:
Color-match any of these printers, i.e. create a *.DAT color table.
3. Assign color table to queues:
Load this *.DAT color table into the print queues of the other printers.
The benefit of this approach is that you only need to recalibrate a printer
if this is required, without having to repeat the color-matching process.
Fig. 16-1 Applying Color Table to Remote Printers
*.DAT *.CAL 1 1
*.CAL 2 2
*.CAL 3 3
» RELATED TOPICS:
-CREATING PRINT OUTPUT QUEUES (PAGE 1-5)
-ITERATIVE PRINTER LINEARIZATION AND CALIBRATION (PAGE 16-9)
-ASSIGNING COLOR TABLE TO EXISTING QUEUE (PAGE 9-4)
Modifying Paper White Simulation
Local
Printers calibrated to the
same reference printer
Remote
The Rendering Intent used during the iterative color matching process is
Absolute colorimetric, by default. This means that the paper color will be
simulated.
You can modify the paper white simulation or turn it off completely by
editing the ORIS_DAT color table.
Enable the advanced user level (see page 16-1). Then proceed as
explained below.
16-2 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com