Press Matcher Web User Manual - image2output - Support

WEB«
3. Click on START MEASUREMENT.
Color-Matching PostScript Printers
Creating Print Output Queues
4. Measure the three chart reference points.
Position the visor on the A1 color patch (top left) and click the instrument
button. Measure the patch on the bottom left and bottom right
in the same way. The other patches are scanned automatically now.
5. Click NEXT when the measurement process has completed.
Iterative Optimization
http://www.image2output.com
The first measurement characterizes the calibrated printer with uncorrected
colors.
Progressively optimize the color match by repeating the following steps:
• Calculating the ORIS_DAT color table
• Printing and measuring the test chart
• Evaluating the delta values
Click NEXT to (re)calculate the color table, which may take some time to
complete. Repeat these steps until the option I WANT TO IMPROVE…
becomes inactive and I AM SATISFIED … becomes active.
Now the delta values are at their lowest and you can click FINISH to end
the optimization process. Usually no more than four measurements are
required to achieve this.
ORIS Press Matcher⁄⁄Web Version 1.1 Quick Start Guide 1-11
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com