Press Matcher Web User Manual - image2output - Support

WEB«
http://www.image2output.com
Specify Color Matching Options
Color-Matched File Output
Creating File Output Queues
• Select the TARGET ICC PROFILE characterizing the target printing
conditions, e.g. ISO Coated V2. You can measure test charts printed
under these conditions or load measurement files.
• Select a TEST CHART that is suitable for your measurement device.
The test charts are organized in subdirectories with the name of the
supported measurement devices. We recommend to use ECI2002.
• The color correction defined by the ORIS_DAT file will be applied to
the test chart. Specify where to save the transformed test chart.
• Enable KEEP PURE BLACK to prevent B/W jobs from turning into color
jobs and to prevent blurred type. If enabled, the colors on the gray
axis will not be mixed with CMY, only the lightness may change.
• Enable STABILIZER to replace CMY colors with black (GCR) in such a
way that a stable gray balance is achieved automatically. Set the
degree of CMY reduction to RECOMMENDED or 60.
ORIS Press Matcher⁄⁄Web Version 1.1 User Manual 2-5
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com