Press Matcher Web User Manual - image2output - Support

Fine Tuning
Step 5: Optimize All Colors Automatically
http://www.image2output.com
6. Click the SMOOTH button in the COL-
OR VALUE CORRECTION dialog. The
transition becomes smoother.
You may have to click SMOOTH
several times.
7. Save the optimized color correction
table (*.CC) and close the dialog.
8. Convert the *.CC table into an ORIS_DAT file (*.DAT).
// WEB«
To do so, click the CREATE ORIS_DAT button in the COLOR TABLE dialog
(see Fig. 18-4). If this dialog does not appear automatically, use
the COLOR | ORIS_DAT TABLE command to open it.
Step 5: Optimize All Colors Automatically
The MINIMIZE DE function reduces all color distances to the smallest possible
value. This function can be applied to selected color channels.
Skip this step if you have performed iterative color matching, because
all color deviations have been minimized already. The MINIMIZE DE
function would have little or no effect in this case.
1. Click the MINIMIZE DE button at the bottom of the COLOR VALUE COR-
RECTION dialog (see Fig. 18-5). The dialog shown in Fig. 18-7
appears.
2. Use the APPLY TO parameter to deselect the color channels that
should not be modified, e.g. Black (K).
3. Click the OPTIMIZE button to start the calculation. The corrections are
logged in the window as the calculation progresses.
Note: The action range defined in the COLOR VALUE CORRECTION dialog has
no effect on this optimization.
4. Click OK to close the dialog, then save the optimized color correction
table (*.CC).
5. Also close the COLOR VALUE CORRECTION dialog.
6. Convert the *.CC table into an ORIS_DAT file (*.DAT).
To do so, click the CREATE ORIS_DAT button in the COLOR TABLE dialog
(see Fig. 18-4). If this dialog does not appear automatically, use
the COLOR | ORIS_DAT TABLE command to open it.
18-8 CGS Hainburg, Germany 06/17/2011
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com