ssw03_plus_series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
TECHNICAL CHARACTERISTICS<br />
8.3 - MECHANICAL<br />
DATA<br />
8.4 - ELECTRONICS<br />
DATA<br />
See figure<br />
Finish: - Electrostatic Epoxy Powder Paint<br />
- Colour: Cover - light-gray - RAL 7032<br />
Cabinet - dark-gray - RAL 7022<br />
Permited mains oscillations:<br />
Voltage: 110/120V or 220/230V 10%<br />
Frequency: 50/60Hz 10%<br />
8.5 - ELECTRONICS DATA / GENERAL<br />
Control<br />
Inputs<br />
Method<br />
Analog<br />
Digital<br />
Voltage variation under load<br />
01 differential input: 0...10Vdc, 0...20mA or<br />
4...20mA, non isolated<br />
Resolution: 10 bits<br />
Programmable functions<br />
04 Galvanically isolated input<br />
(optocoupled), 24Vdc<br />
Programmable functions<br />
Outputs<br />
Safety<br />
Analog<br />
Relay<br />
Protections<br />
01, non isolated, resolution 8 bits - 0...10V<br />
Programmable functions<br />
02 relays, NO contact, 250V/1A<br />
Programmable functions<br />
01 relay, NO, NC contact - 250V/1A specific<br />
for faults.<br />
Under/Overcurrent at the output of the Soft-<br />
Starter<br />
Phase fault for the supply<br />
Motor phase fault (motor non connected)<br />
Mains frequency with ± 10% oscillation<br />
Tyristor fault<br />
Inverted phase sequence (programmable)<br />
Overtemperature at the power stage<br />
Overload at the output (I²t).<br />
Extern fault<br />
CPU Error<br />
Programming error<br />
Error the serial interface<br />
Communication Serial Interface<br />
RS 232<br />
101<br />
Downloaded from www.Manualslib.com manuals search engine
Change language