ssw03_plus_series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
QUICK PARAMETER REFERENCES,<br />
ERROR MESSAGES AND STATUS MESSAGES<br />
Para- Function Adjustable Factory User's Page<br />
meter Range Setting Setting<br />
P97 Second hardware error 1...8<br />
P98 Third hardware error 1...8<br />
P99 Fourth hardware error 1...8<br />
58<br />
58<br />
58<br />
2. Error Messages<br />
Display<br />
E01<br />
E02<br />
E03<br />
E04<br />
E05<br />
E06<br />
E07<br />
E08<br />
E24<br />
E2X<br />
E29<br />
Phase failure or thyristor fault or motor not connected<br />
At the end of time of the programmed acceleration time, the voltage does<br />
not reach 100% UN due to the current limit.<br />
Overtemperature at the thyristors and in the heatsink<br />
Motor overload<br />
Undercurrent (applicable to pumps)<br />
Immediate overcurrent<br />
Phase rotation<br />
External fault<br />
Programming error<br />
Serial communication error<br />
Serial communication error<br />
Meaning<br />
3. Soft-Starter Status<br />
Display<br />
rdy<br />
PuP<br />
EEP<br />
on<br />
oFF<br />
Definition<br />
Soft-Starter is ready to be enabled<br />
Loading pump control parameters<br />
Loading "Default" values<br />
Function enabled<br />
Function disabled<br />
10<br />
Downloaded from www.Manualslib.com manuals search engine