ssw03_plus_series
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5<br />
USE OF THE HMI<br />
This Section describes the Human-Machine Interface (HMI-<br />
3P) and the programming mode of the Soft-Starter, providing<br />
the following information:<br />
General description of the HMI-3P<br />
Use of the HMI-3P<br />
SSW-03 Plus Parameter Organization<br />
Access to the parameters of the Soft-Starter<br />
Parameter changing (programming)<br />
Description of the Status and Signalling Indications<br />
5.1 - DESCRIPTION OF<br />
THE HMI-3P IN-<br />
TERFACE<br />
The HMI-3P consists in 4 digits, seven segment LED display, 2<br />
signalling LEDs and 5 keys. Figure 5.1 describes the HMI-3P.<br />
START<br />
Indicates that the Soft-Starter has received a<br />
start or stop command. (motor driven)<br />
RUN Indicates the switch status; if at acceleration /<br />
deceleration ramp or at rated voltage.<br />
Enables motor via ramp.<br />
Disables the Soft-Starter via ramp (when<br />
programmed). Resets the Soft-Starter after an<br />
error has accured.<br />
Changes display between the parameter<br />
number and its value.<br />
Figure 5.1 - HMI-3P<br />
Description<br />
Increments the number of the parameter or its<br />
value.<br />
Decrements the number of the parameter or its<br />
value.<br />
48<br />
Downloaded from www.Manualslib.com manuals search engine
Change language