ssw03_plus_series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3<br />
INSTALLATION<br />
3.3 - INSTALLATION<br />
OF OPTIONAL<br />
DEVICES<br />
3.3.1 - HMI-3P ON THE<br />
PANEL DOOR<br />
3.3.1.1 - Mechanical<br />
installation<br />
When installed on the panel door, the following is<br />
recommended:<br />
<br />
<br />
<br />
temperature within the range of 0 0 C to 55 0 C (32°F to<br />
131°F).<br />
environment free of corrosive vapour, gas or liquids.<br />
air free of dust or metallic particles.<br />
<br />
Avoid to exposing the key pad to direct sunlight, rain or<br />
moisture.<br />
For mounting, see Figure 3.11.<br />
24<br />
(0.945)<br />
E01 - Thyristor fault/phase failure<br />
Falha no tiristor / falta de fase<br />
E02 - Full speed not reached<br />
Rotação nominal não alcançada<br />
E03 - Overtemperature - Sobretemperatura<br />
E04 - Overload - Sobrecarga<br />
E05 - Undercurrent - Subcorrente<br />
E06 - Overcurrent - Sobrecorrente<br />
E07 - Phase rotation - Seqüência de fase<br />
E08 - External fault - Falha externa<br />
138 (5.43)<br />
132 (5.20)<br />
86.5 (3.40)<br />
MAX. THICKNESS<br />
OF SHEET = 2MM<br />
(0.078)<br />
92 (3.62)<br />
26<br />
(1.02)<br />
132.5 (5.22)<br />
Figure 3.11 - Dimensions/Fastening of the HMI-3P.<br />
All dimensions in mm (inches)<br />
40<br />
Downloaded from www.Manualslib.com manuals search engine