Sound Processor
Sound Processor
Sound Processor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Proel <strong>Sound</strong> <strong>Processor</strong>s User Manual<br />
To load a preset select it by the “” encoder, the display will show the preset name (up to 8<br />
characters) and its position.<br />
Load Preset<br />
01: Nome preset<br />
If the selected preset is not the one currently loaded, the preset number will flash (on the lower left<br />
corner of the display), if the preset is the one currently loaded, its number will not flash.<br />
To load the selected preset (procedure to be followed only when preset is flashing) press the<br />
“ENTER” button, otherwise to exit from the sub -menu press the “QUIT” button. During preset<br />
loading on the display will be shown the following message:<br />
Wait: Loading ....<br />
If you try to load a User preset, which hasn’t been initialized, yet (Empty) the display shows an<br />
Error message for some seconds.<br />
Error: Preset empty<br />
SAVE PRESET menu<br />
Through this menu it’s possible to save a preset in one of the 16 user preset available positions.<br />
Inside this menu you can use the “” encoder to select the desired memory position. While<br />
surfing, the display will show preset user names and their position only. Pressing the “ENTER”<br />
button it’s possible to save the preset on selected position. If the selected position already contains<br />
a preset, the display will show the following warning message.<br />
Overwrite Preset ?<br />
Yes = Enter; No=Quit<br />
Pressing the “QUIT” button you’ll be back to SAVE menu, then pressing the “ENTER” button the<br />
preset will be saved and the display will show the following message:<br />
Wait: Saving.....<br />
28
Change language