Sound Processor

Proel Sound Processors User Manual
5) VARIATION Knob
This knob should be used to adjust all parameter values by “ “ encoder in all choice menus.
6-11) “ENTER” LED & Button
The button can be used to confirm the values and to enter in menus and sub-menus.
At each button pressure the LED turns on, thus confirming the operation.
7) “” Encoder
This knob selects operating menus and parameters to be varied when the unit is in “search” mode.
Please refer to page 53 for menu details.
8-12) “QUIT” LED & Button
This button can be used to exit from sub-menus or to cancel an operation. At each button pressure
the LED turns on.
9) Power on/off button
Press this button to turn on/off the unit.
10) LCD Display
Rear Panel
8 7
6 5 4 3
7 2
1
1) INPUTS Connections
A and B channels inputs on ¼” (6.3mm.) unbalanced (TS) jack connectors for line signal from a
mixer or other line level analog sources.
2) OUTPUT Connections
Unbalanced (TS) ¼” (6.3mm.) jack connectors for A and B line output signals.
3) RS232 Port
This connector is useful to connect the unit to your PC adopting a serial cable.
4) SELECTOR Switch (MIDI/RS232/USB)
This selector allows the user to select the type of interface with the computer.
52