Sound Processor

More documents

Recommendations

Info

Proel Sound Processors User Manual SOFTWARE INTERFACE 1) Menus - “File” Choosing “Exit” you can exit from the program. - “Device” Selecting “Store” you can save selected preset settings on User presets (17-32), it’s not possible to edit Factory presets. Selecting “Equalizer Type” you can choose equalizer type (parametric or graphic). WARNING: passing from a parametric equalizer to a graphic equalizer all the settings of frequency boosting/attenuation will be lost! - “PC Preset” It includes “Load Preset” and “Save Preset” sub-menus. If we are inside a factory preset, the load preset command is defeated. The “Save Preset” allows us to export settings on a file. - “Utility” 62
Proel Sound Processors User Manual Using “Utility” menu you can copy channel A settings to channel B (“Copy channel A to B”) and vice versa (“Copy channel B to A”). 2) Channel option section Using this section boxes you can “Link Channel A and B”, and to activate “Bypass” to deactivate the equalizer on both channels. 3) Preset section Using this section you can select Factory Presets (from 1 to 16) as well as User Presets (from 17 to 32). Using Selecting a User preset which hasn’t been initialized yet (Empty) the program will ask for an association with a preset saved on PC, asking for automatic opening of “Load Preset” function. You can scroll through presets using arrows keys. Pressing the “Confirm” key you confirm the operation, thus recalling the preset. 4) Channel A/ Channel B Using the channel select section, you can select the window for channel A or the window for channel B. 5) Equalization display This section graphically displays which kind of equalization we’re applying to our signal for the selected channel. 6) Low Pass & High Pass Filters section In this section you can apply to selected channel a High Pass and a Low Pass filter. You can select these filter slope by using the dialog box “Slope”. 7) Delay section You can apply a delay line to equalizer signal using these two virtual faders. “Adj” is for coarse setting, while “Fine” is for detailed setting. 8) Mute / Set Graphic / Flat EQ “Mute” box allows to mute the unit. “Set Graphic” box allows you to transform the parametric equalizer in graphic equalizer. “Flat EQ” restore all filters settings to “0” value. 9) Virtual sliders for equalizer frequencies When the slider is at its central position, boost/cut is equal to “0”. Raising each slider value the frequency will be boost, lowering the slider value the frequency will be cut. 10) Parametric Equalizer Frequency and Q values Selecting the parametric equalizer mode, in this section upper dialog boxes you can select filter frequency, while lower dialog boxes can be used to select the “Q” value. 63
Page 1 and 2:
Sound Processor REMOTE CONTROL SOFT
Page 3 and 4:
Proel Sound Processors User Manual
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Sound Processor REMOTE CONTROL SOFT
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90: Proel Sound Processors User Manual
Page 139: Proel Sound Processors User Manual
show all

Sound Processor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?