Sound Processor
Sound Processor
Sound Processor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Proel <strong>Sound</strong> <strong>Processor</strong>s User Manual<br />
To access to the main menu, you need to press the “ENTER” button or to rotate the “” encoder.<br />
To return to level meter indication, press the “QUIT” button.<br />
Each button pressure is shown by LEDs over each button. After “” encoder rotation, as well as<br />
“ENTER” pressure, the display will show the following screen.<br />
Preset xx: Name preset<br />
Load Preset<br />
Front Panel<br />
1 2 3<br />
4 5<br />
6 7 8<br />
9<br />
10<br />
11 12<br />
1) INPUT LEVEL Knob<br />
This knob allows you to set input signal gain. In order to achieve the best performances, adjust it<br />
as suggested by larger indent around the knob.<br />
2) PROCESS Switch<br />
This switch allows you to activate/deactivate the feedback detection/reduction process.<br />
In ON position equalization is activated.<br />
In OFF position equalization is de-activated, regardless of its settings.<br />
3) OUTPUT LEVEL Knob<br />
This knob adjusts the processor output level. In order to achieve the best performances, adjust it<br />
as suggested by larger indent around the knob.<br />
4) CLIP LED<br />
This LED turns on when the input signal level is too high. Adjust input signal level by “INPUT<br />
LEVEL” knob so that this LED will not turn on.<br />
51
Change language