Sound Processor

Proel Sound Processors User Manual
3)Control Change N Val.
N (choice of parameter to modify)=
14: EQ Type Val.=(0=Parametric, 1=Graphic)
16:Filter number
Val.=(0…14)
17: Selected filter Gain (attenuation/boost) Val.=(see Table 1)
18: Selected filter Frequency Val.=(see Table 2)
19: Selected filter Bandwidth Val.=(see Table 3)
20: Hi Pass filter Frequency Val.=(see Table 2)
21: Hi Pass filter Attenuation Val.=(0=bypass, 1= -6dB/Octave, 2= -12dB/Octave)
22: Low Pass filter Frequency Val.=(see Table 2)
23: Low Pass filter Attenuation Val.=( 0=bypass, 1= -6dB/Octave, 2= -12dB/Octave)
24: Coarse Delay Val.=(see Table 4)
25: Delay Fine Val.=(from 0 to 1 ms, step 21us; =0-47)
26: Mute/un mute Val.=(0=Mute, 1=un mute)
* To choose table value (explained at page 60 and page 61) to be inserted here, please see appendix 3 at page 71.
Note: If you don’t select initial Program Change, Control Change will modify the settings of the preset currently
shown on digicurve display.
Table 1 (Gain – value in dB, from –15 to +15, 0.5 dB step)
0 1 2 3 4 5 6 7 8 9
0 -15 -14,5 -14 -13,5 -13 -12,5 -12 -11,5 -11 -10,5
10 -10 -9,5 -9 -8,5 -8 -7,5 -7 -6,5 -6 -5,5
20 -5 -4,5 -4 -3,5 -3 -2,5 -2 -1,5 -1 -0,5
30 0 +0,5 +1 +1,5 +2 +2,5 +3 +3,5 +4 +4,5
40 +5 +5,5 +6 +6,5 +7 +7,5 +8 +8,5 +9 +9,5
50 +10 +10,5 +11 +11,5 +12 +12,5 +13 +13,5 +14 +14,5
60 +15
Table 2 (High Pass and Low Pass filters Frequency– value in Hz)
0 1 2 3 4 5 6 7 8 9
0 20 21,2 22,5 23,7 25 26,6 28,3 29,9 31,5 33,6
10 35,8 37,9 40 42,5 45 47,5 50 53,5 57 59,5
20 63 67 71,5 76 80 85 90 95 100 106
30 113 119 125 134 143 151 160 170 180 190
40 200 212 225 237 250 266 283 299 315 336
50 358 379 400 425 450 475 500 532 565 630
60 672 715 757 800 850 900 950 1000 1006 1012
70 1018 1025 1033 1042 1051 1060 1070 1080 1090 2000
80 2012 2025 2037 2050 2066 2082 2098 3015 3036 3057
90 3078 4000 4025 4050 4075 5000 5032 5065 5097 6030
100 6072 7015 7057 8000 8050 9000 9050 10000 10600 11200
110 11800 12500 13300 14200 15100 16000 17000 18000 19000 20000
59