Sound Processor

More documents

Recommendations

Info

Proel Sound Processors User Manual After selecting Band Split item and pressing the “ENTER” button Edit A+B Band Split you will be able to set parameter value by “VARIATION” knob. Edit Low/High BandComp A/B By these sub-menus you can edit value parameters of the compressors. Edit A Edit A Thr Ratio Rel Atk Thr Ratio Rel Atk Edit B Edit B Thr Ratio Rel Atk Thr Ratio Rel Atk Edit A Volume + 2.0 dB Edit A Volume +2.0 dB Edit B Volume +2.0 dB Edit B Volume +2.0 dB After selecting the desired item and pressing the “ENTER” button (e. g. Low band Compressor A, the management of the other compressors edit is similar) Edit A LBand Comp It will be possible to edit the compressor “Threshold” parameter (from 0 to -29dB, 1dB steps) using the “VARIATION” knob. For parameter values see TABLE 1 at page 46. 40
Proel Sound Processors User Manual Edit A LBand Comp Use the ““ encoder to select “Ratio” parameter, then use the “VARIATION” knob to modify compression ratio value (first number refers to input value, the second value refers to output value – the meaning is “which is the compression ratio for the signal over the threshold”). For parameter values see TABLE 2 at page 46. Use the ““ encoder to select “Release” parameter. Edit A LBand Comp Then use the “VARIATION” knob to modify release time (time to exit from the compression processing when the signal is under the “Threshold”). For parameter values see TABLE 3 at page 46. Use the ““ encoder to select “Attack” parameter Edit A LBand Comp Then use the “VARIATION” knob to modify attack time (time to enter the compression processing when the signal is over the “Threshold”). For parameter values see TABLE 4 at page 46. Turning again the ““ encoder you’ll be back to “Threshold” parameter. To exit from this sub-menu use the “QUIT” button. Edit Low/High Band Volume A/B Using these sub –menus you can edit the volume of the single selected band Edit A Lband Vol Use the “VARIATION” knob to modify the volume value (-/+ 6 dB, 0.5dB steps). For parameter values see TABLE 5 at page 46. Edit A+B Output Compressor Using this menu you can edit Compressor-Expander parameters. Warning! The setting of these parameters will affect both channels A and B. Edit A+B < Out Comp > Thr CRatio ERatio Rel Atk 41
Page 1 and 2:
Sound Processor REMOTE CONTROL SOFT
Page 3 and 4:
Proel Sound Processors User Manual
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68: Proel Sound Processors User Manual
Page 79 and 80: Sound Processor REMOTE CONTROL SOFT
Page 117: Proel Sound Processors User Manual
show all

Sound Processor

Create successful ePaper yourself

Delete template?

Save as template?