Sound Processor

More documents

Recommendations

Info

Proel Sound Processors User Manual APPENDIX 4 - CONNECTIONS - Hook-up and setting examples (digicurve, predator, dualcomp) Units mentioned in this owner’s manual have been designed to be used as mixer channel or master output processors. Thus we suggest using the following hook-up diagram. Insert cable Send from mixer Return from effect unit Mixer INSERT (channel or Master) Figure 1 MIXER PROCESSOR Notes: It’s possible to connect another insert cable between mixer channel 2 insert (or any other mixer channel) and raptor “B” in/out connectors, thus simultaneously using the effect on two channels. Anyway this solution could slow down the sound and software processing since two channels will be simultaneously processed. It’s possible to connect (upon your mixer design) the processor to your FOH mixer sub-group insert (e. g. the vocal sub-group), as well as to a sub-group insert of your FOH or Monitor mixer. It’s possible to connect digicurve digital on mixer Main Mix inserts or to connect it between the mixer and your sound system. The above-described hook-up is possible, but not suggested for predator and dualcomp processors. In these cases the entire signal will be treated in the same way (applying the same equalization and/or compression), thus making a less natural mix. 72
Proel Sound Processors User Manual APPENDIX 4 - CONNECTIONS - Insert (“Y” shape) cable connection TIP = send to effect unit ¼” (6.3mm.) TRS jack RING = return from effect unit ¼” (6.3mm) mono jack Note: If your mixer has insert circuit with two mono TS jacks instead of just one TRS jack, you can use two discrete mono cables instead of a “Y” cable. In order to reduce the risk to pick-up interferences and noises, we suggest you to use short high quality shielded cables. 73
Page 1 and 2:
Sound Processor REMOTE CONTROL SOFT
Page 3 and 4:
Proel Sound Processors User Manual
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Sound Processor REMOTE CONTROL SOFT
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100: Proel Sound Processors User Manual
Page 149: Proel Sound Processors User Manual
show all

Sound Processor

Create successful ePaper yourself

Delete template?

Save as template?