Sound Processor

Proel Sound Processors User Manual
Par 11:
PreDly E.Ref: Settles the time elapsing from original sound to early reflections.
Range: 0 ms to 200 ms in 2 ms. steps
# for Control Change 17=10
# for Control Change 16=Table n°1
Par 12:
F.Ref Vol: Settles fast reflections percentage that will be blended with original signal.
Range: 0% - 100%
# for Control Change 17=11
# for Control Change 16= from 0 to 100
Par 13:
PreDly F.Ref: Settles elapsing time from the original sound and first fast reflection.
Range 0 ms - 200 ms in 2 ms steps.
# for Control Change 17=12
# for Control Change 16=Table n° 1
Par 14:
Reverb Vol: Reverb master volume.
Range 0% - 100%
# for Control Change 17=12
# for Control Change 16= from 0 to 100
GATE REVERB
Par 1:
Time: Settles time of reverb cut.
Range: from 21 to 243 ms
# for Control Change 17=0
# for Control Change 16= from 0 to 100
Par 2:
H-Damp Freq: High frequency dampening. The value settles reverb cut-off upper frequency.
Range: 20hz to 20Khz, in 1/3 octave steps.
# for Control Change 17=1
# for Control Change 16=Table n° 4
Par 3:
L-Damp Freq: Low frequency dampening. The value settles reverb cut-off lower frequency.
Range: 20hz to 20Khz, in 1/3 octave steps.
# for Control Change 17=2
# for Control Change 16= Table n° 4
Par 4:
PEQ Gain: Boost/cut (+/– 15 dB in 0.5 db steps) for effect signal parametric equalization (PEQ).
# for Control Change 17=3
# for Control Change 16= Table n° 5
Par 5:
PEQ Freq: Settle the central frequency of PEQ.
Range: 20hz to 20Khz, in 1/3 octave steps.
# for Control Change 17=4
# for Control Change 16= Table n° 4
Par 6:
PEQ Q: Settle bandwidth of parametric equalizer (PEQ).
Range: 0.050 Octaves – 3 Octaves in 0.050 steps. Lower Q value will produce more “narrow” bandwidth.
# for Control Change 17= 5
# for Control Change 16= Table n° 7
10