Sound Processor
Sound Processor
Sound Processor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Proel <strong>Sound</strong> <strong>Processor</strong>s User Manual<br />
APPENDIX 3 - USE OF CHARTS FOR MIDI PROGRAMMING<br />
To establish table value to be inserted in your MIDI sequences for MIDI programming, you just need to identify,<br />
inside the table, the parameter value to be inserted.<br />
That value corresponds to those you can directly see on effect display.<br />
The value will be established by sum of values choosing row and column values.<br />
For measurement units expressed in percentage or in step, you don’t need to use tables and value to be inserted<br />
corresponds to Control Change values from 0 to 127.<br />
Referring to following table, for example, if you want to insert value “66” using MIDI Control Change, the value<br />
inserting procedure will be the following one<br />
ROW VALUE<br />
CONTROL<br />
CHANGE<br />
VALUE<br />
COLUMN<br />
VALUE<br />
Row value = 3 +<br />
column value = 30<br />
= 33.<br />
Thus Control Change value to be inserted is 33, corresponding to “66” value at crossing point.<br />
This procedure is the same for all the tables.<br />
The table to be chosen for each parameter is indicated in parameter description.<br />
70
Change language