Sound Processor

More documents

Recommendations

Info

Proel Sound Processors User Manual CHORUS REVERB Par 1: Chorus rate: settles chorus rate. Range: 0% - 100% # for Control Change 17=0 # for Control Change 16= from 0 to 100 Par 2: % Vol Chorus: settles percentage of chorus volume. Range: 0% - 100% # for Control Change 17=1 # for Control Change 16= from 0 to 100 Par 3: H-Damp Freq: High frequency dampening. The value settles reverb cut-off upper frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=2 # for Control Change 16=Table n° 4 Par 4: Low-damp: Low frequency dampening. The value settles reverb cut-off lower frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=3 # for Control Change 16= Table n° 4 Par 5: PreDly Rev: Settles elapsing time from the original sound and reverb beginning. Range: 0-200 ms (in 2 ms steps.) # for Control Change 17=4 # for Control Change 16=Table n° 1 Par 6: Decay: settles reverb decay time. Range: 0-200 ms (In 2 ms steps). # for Control Change 17=5 # for Control Change 16=Table n° 1 Par 7: % Reverb: settles percentage of reverb effect blended to chorus. Range: 0% - 100%. # for Control Change 17=6 # for Control Change 16= from 0 a100 Par 8: % Vol Reverb: settles reverb master volume. Range: 0% - 100% # for Control Change 17=7 # for Control Change 16= from 0 to 100 DELAY REVERB Par 1: Delay Time: settles delay time in milliseconds. Range: from 0 to 300 ms in 3 ms. steps. # for Control Change 17=0 # for Control Change 16=Table n°2 Par 2: Delay Decay: settles percentage of delay decay. Range: 0% - 100% # for Control Change 17=1 # for Control Change 16= from 0 to 100 Par 3: Delay L-Pass: Filter to cut delay high frequencies. The value settles delay cut-off upper frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=2 # for Control Change 16= Table n°4 14
Proel Sound Processors User Manual Par 4: % Vol Delay: settles percentage of Delay effect. # for Control Change 17= 3 # for Control Change 16= from 0 to 100 Par 5: H-Damp Rev: High frequency dampening. The value settles reverb cut-off upper frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=4 # for Control Change 16= Table n°4 Par 6: L-Damp Rev: Low frequency dampening. The value settles reverb cut-off lower frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=5 # for Control Change 16= Table n°4 Par 7: Lpass Rev: Filter to cut reverb high frequencies. The value settles delay cut-off upper frequency. Range: 20hz to 20Khz, in 1/3 octave steps. # for Control Change 17=6 # for Control Change 16=Table n°4 Par 8: PreDly Rev: settles elapsing time from the original sound and reverb beginning. Range: 0-200 ms (in 2 ms steps.) # for Control Change 17=7 # for Control Change 16=Table n°1 Par 9: Diffusion: settles reverb diffusion. Range 0% - 100% # for Control Change 17=8 # for Control Change 16= from 0 to 100 Par 10: Density: settles reverb density. Range 0% - 100% # for Control Change 17=9 # for Control Change 16= from 0 to 100 Par 11: Decay: settles reverb decay time. Range: 0% - 100%. Lower values reduce decay (reverb duration). # for Control Change 17=10 # for Control Change 16= from 0 to 100 Par 12: % Reverb: settles percentage of reverb effect blended to delay. Range: 0% - 100% # for Control Change 17=11 # for Control Change 16= from 0 to 100 Par 13: %Vol Reverb: settles reverb master volume. Range: 0% - 100% # for Control Change 17=12 # for Control Change 16= from 0 to 100 CHORUS DELAY Par 1: Chorus Depth: settles chorus depth. Range: 0% - 100% # for Control Change 17=0 # for Control Change 16= from 0 to 100 Par 2: Chorus Rate: settles chorus rate. Range: 0% - 100% # for Control Change 17=1 # for Control Change 16= from 0 to 100 15
Page 1 and 2:
Sound Processor REMOTE CONTROL SOFT
Page 3 and 4:
Proel Sound Processors User Manual
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42: Proel Sound Processors User Manual
Page 79 and 80: Sound Processor REMOTE CONTROL SOFT
Page 91: Proel Sound Processors User Manual
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
show all

Sound Processor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?