Product Description XI/ON - Eaton Automation

More documents

Recommendations

Info

XI/ON: Gateways for Modbus TCP 8 Guidelines for Electrical Installation The following group combination can be routed only in separate bundles or separate cable ducts (no minimum distance apart): Group 1/Group 2 The group combinations: Group 1/Group 3 and Group 2/Group 3 must be routed in separate cable ducts with a minimum distance of 10 cm apart. This is equally valid for inside buildings as well as for inside and outside of switchgear cabinets. Cable Routing Outside Buildings Outside of buildings, cables should be routed in closed (where possible), cage-type cable ducts made of metal. The cable duct joints must be electrically connected and the cable ducts must be earthed. Warning Observe all valid guidelines concerning internal and external lightning protection and grounding specifications when routing cables outside of buildings. 8.1.3 Lightning Protection The cables must be routed in double-grounded metal piping or in reinforced concrete cable ducts. Signal cables must be protected against overvoltage by varistors or inert-gas filled overvoltage arrestors. Varistors and overvoltage arrestors must be installed at the point where the cables enter the building. 164 M001973-01, 07/2007
XI/ON: Gateways for Modbus TCP 8 Guidelines for Electrical Installation 8.1.4 Transmission Media For a communication via Ethernet, different transmission media can be used: coaxial cable 10Base2 (thin koax), 10Base5 (thick koax, yellow cable) optical fibre (10BaseF) twisted two-wire cable (10BaseT) with shielding (STP) or without shielding (UTP). M001973-01, 07/2007 165
Page 1 and 2:
Product Description XI/ON Gateways
Page 3 and 4:
XI/ON: Gateways for Modbus TCP Safe
Page 5 and 6:
XI/ON: Gateways for Modbus TCP Tabl
Page 7 and 8:
XI/ON: Gateways for Modbus TCP Tabl
Page 9 and 10:
XI/ON: Gateways for Modbus TCP 1 Ab
Page 11 and 12:
XI/ON: Gateways for Modbus TCP 1 Ab
Page 13 and 14:
XI/ON: Gateways for Modbus TCP 2 XI
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
XI/ON: Gateways for Modbus TCP 3 Et
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
XI/ON: Gateways for Modbus TCP 4 Te
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
XI/ON: Gateways for Modbus TCP 5 Im
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
XI/ON: Gateways for Modbus TCP 6 Ap
Page 113 and 114: XI/ON: Gateways for Modbus TCP 6 Ap
Page 149 and 150: XI/ON: Gateways for Modbus TCP 7 Gu
Page 163: XI/ON: Gateways for Modbus TCP 8 Gu
Page 213 and 214: XI/ON: Gateways for Modbus TCP 10 G
Page 215 and 216:
XI/ON: Gateways for Modbus TCP 10 G
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
XI/ON: Gateways for Modbus TCP 11 I
show all

Product Description XI/ON - Eaton Automation

Create successful ePaper yourself

Delete template?

Save as template?