Product Description XI/ON - Eaton Automation

XI/ON: Gateways for Modbus TCP 9 Appendix
Bits Explanations
STS_DO1 The DO1 status bit indicates the status of digital
output DO1.
STS_DI The DI status bit indicates the status of digital input
DI.
STS_GATE 1: Counting operation running.
STS_ND Status zero crossing
Set on crossing zero in counter range when
counting without main direction.
This bit must be reset by the RES_STS control bit.
STS_UFLW Status lower count limit
Set if the count value goes below the lower count
limit.
This bit must be reset by the RES_STS control bit.
STS_OFLW Status upper count limit
Set if the counter goes above the upper count limit.
This bit must be reset by the RES_STS control bit.
STS_CMP2 Status comparator 2
This status bit indicates a comparison result for
comparator 2 if:
– The output DO2 is released with CTRL_DO2 = 1.
and
– a comparison is run via MODE_DO2 = 01, 10 or 11.
Otherwise STS_CMP2 simply indicates that the
output is or was set. STS_CMP2 is also set if DO2
SET_DO2 = 1 when the output is not released.
This bit must be reset by the RES_STS control bit.
M001973-01, 07/2007 177