Product Description XI/ON - Eaton Automation

XI/ON: Gateways for Modbus TCP 4 Technical Features
4.5 Address Setting
4.5.1 LED-behavior
The addressing of the XI/ON Modbus TCP gateway can be realized
via different modes:
rotary mode (manual addressing via rotary coding-switches)
PGM mode (manual addressing via software)
BootP mode, DHCP mode (automatic addressing via BootP/
DHCP-server at the boot-up of the gateway).
The setting of the address modes is done via the 3 rotary codingswitches
at the gateway.
Note
It is not necessary to address the station’s internal module bus.
Attention
The cover of the decimal rotary coding-switches must be closed
after use. It serves for protecting against dirt.
During it’s start-up, the module waits for the address setting via the
BootP-server. This is indicated by the red flashing "MS" LED. The
LED begins to flash green, as soon as the address setting via the
server is completed. The station is ready for communication.
M001973-01, 07/2007 37