Product Description XI/ON - Eaton Automation

XI/ON: Gateways for Modbus TCP 5 Implementation of Modbus TCP
5.5.4 Register 0×113C and 0×113D:
"Restore Modbus-connection parameter"
Registers 0×113C and 0×113D serve for resetting the parameterregister
0×1120 and 0×1130 to 0×113B to the default settings.
For this purpose, write "0×6C6F" in register 0×113C. To activate the
reset of the registers, write "0×6164" ("load") within 30 seconds in
register 0×113D.
Both registers can also be written with one single request using the
function codes FC16 and FC23.
The service resets the parameters without saving them. This can be
achieved by using a following "save" service.
5.5.5 Register 0×113E and 0×113F:
"Save Modbus-connection parameters"
Registers 0×113E and 0×113F are used for the non-volatile saving
of parameters in registers 0×1120 and 0×1130 to 0×113B.
For this purpose, write "0×7361" in register 0×113E. To activate the
saving of the registers, write "0×7665" ("save") within 30 seconds in
register 0×113F.
Both registers can also be written with one single request using the
function codes FC16 and FC23.
M001973-01, 07/2007 75