Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au
Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au
Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2010-08-05<br />
5. Verify if the heatsink is installed<br />
properly with no damage to<br />
heat fins.<br />
6. Verify if the system is running<br />
as expected.<br />
7. Heatsink thermal grease<br />
possibly missing or improperly<br />
installed during previous<br />
repair. Verify if correct thermal<br />
grease is present.<br />
8. Run ASD tests for sensor<br />
monitoring.<br />
9. After logic board replacement,<br />
verify if the computer is<br />
running as expected.<br />
Uncategorized Symptom<br />
Quick Check<br />
Symptom Quick Check<br />
Uncategorized Symptom<br />
Unable to locate appropriate<br />
symptom code<br />
Yes Go to step 7.<br />
No Replace missing screws or<br />
damaged heatsink. Go to step<br />
6.<br />
Yes Heatsink installed incorrectly.<br />
Issue resolved.<br />
No Go to step 7.<br />
Yes Replace heatsink with correct<br />
thermal grease type and<br />
retest. Go to step 8<br />
No Replace heatsink with correct<br />
thermal grease type and<br />
retest.<br />
Yes Thermal module or other<br />
sensor reseat resolved issue.<br />
No Replace logic board if sensor<br />
error detected. Go to step 9.<br />
Yes Bad logic board. Issue<br />
resolved.<br />
No Use minimum configuration<br />
troubleshooting to isolate the<br />
issue.<br />
<strong>MacBook</strong> <strong>Pro</strong> (<strong>15</strong>-<strong>inch</strong>, <strong>M<strong>id</strong></strong> 2010) Symptom Charts — Mechanical Issues: Thermals and Enclosure 108<br />
X10<br />
X10<br />
M23<br />
Verify if existing symptom code applies to the issue<br />
reported by the user. If not, document reported<br />
symptom and send feedback to smfeedback@apple.<br />
com stating that a suitable symptom code could not<br />
be found.