 Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au

Removal
Caution: Do not pull on
the black tab or the LVDS
lock bar. Pulling on the tab
to remove the LVDS cable
will likely result in the
metal LVDS lock bar being
torn off the cable body.
This bar is only to be used
to disengage the lock
from the LVDS connector.
A broken lock bar results
in a display assembly
replacement.
1 Peel EMI gasket off
top of LVDS cable,
toward the fan
2 To disconnect LVDS
cable, grasp black
tab and gently swing
LVDS lock bar up and
back to unlock the
cable.
3 Slide cable out of
connector by pulling
the cable. Do not pull
the black tab or lock
bar.
2010-08-05
MacBook Pro (15-inch, Mid 2010) Take Apart — Display Assembly 154