29.03.2013 Views

 Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au

 Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au

 Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

2010-08-05<br />

9. Check for No Backlight<br />

Condition.<br />

Power on unit.<br />

Using a lamp or bright light<br />

source, inspect for faint image,<br />

and verify if a faint image can<br />

be seen.<br />

10. Verify with Known good<br />

display assembly<br />

Connect known-good display<br />

assembly to system.<br />

11. Verify with reseated backlight<br />

cable or replaced display<br />

assembly<br />

Verify if unit now has v<strong>id</strong>eo<br />

and backlight.<br />

Yes Logo image visible - check<br />

LVDS cable and inspect for<br />

damage near clutches:<br />

. if damaged, replace display<br />

assembly and go to step 11<br />

. if cable is not damaged, run<br />

Clamshell Service Diagnostic<br />

utility and check for LCD<br />

panel presence, If not found,<br />

reseat LVDS cable and retest,<br />

then go to step 11<br />

No If symptom continues, go to<br />

step 10.<br />

Yes System is functioning with<br />

known-good display assembly<br />

Replace display assembly if<br />

following symptom reporting:<br />

- had no power issue<br />

- had incorrect/missing colors<br />

- had blank v<strong>id</strong>eo<br />

- had distorted / blurred v<strong>id</strong>eo<br />

- had vertical/horizontal lines<br />

- had noise/unstable flickering<br />

- had dim backlight<br />

- had bad spot(s)/pixels<br />

- had no backlight<br />

- could not change resolution<br />

No Symptoms unchanged.<br />

Replace logic board.<br />

Yes Issue was only due to<br />

damaged display assembly or<br />

unseated cable.<br />

No Previous display cable<br />

damaged the logic board.<br />

Replace logic board.<br />

L09<br />

L01<br />

L02<br />

L03<br />

L04<br />

L05<br />

L06<br />

L07<br />

L08<br />

L09<br />

L10<br />

M03<br />

M25<br />

<strong>MacBook</strong> <strong>Pro</strong> (<strong>15</strong>-<strong>inch</strong>, <strong>M<strong>id</strong></strong> 2010) Symptom Charts — Startup and Power Issues 37

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!