 Apple Technician Guide MacBook Pro (15-inch, Mid ... - tim.id.au

Removal
1 Caution: The cable
is fragile; be careful
when disconnecting
and removing the it.
2 Use black stick to
disconnect cable from
connector on logic
board and carefully
pry cable from top of
speaker.
3 Remove 4 screws:
• 2 (2.6 mm) 922-9036
on cable
• 2 (8.9 mm) 922-9105
on front bracket
Replacement Note:
Make sure rubber
gaskets are installed
on front bracket
before reinstalling 2
screws.
4 Carefully peel up
cable from top case.
Replacement Note:
Press cable so it lies
flat in top case.
2010-08-05
MacBook Pro (15-inch, Mid 2010) Take Apart — Hard Drive/IR/Sleep Indicator Cable 131