PDP11 PeripheralsHbk 1972 - Trailing-Edge
PDP11 PeripheralsHbk 1972 - Trailing-Edge
PDP11 PeripheralsHbk 1972 - Trailing-Edge
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Weight:<br />
Heat Dissipation:<br />
Operating Temperature:<br />
Humidity:<br />
VT05A:<br />
VT05B:<br />
VT05C:<br />
VT05D:<br />
Power Consumption:<br />
Type:<br />
Controller:<br />
551bs<br />
800 BTU Ihr. maximum<br />
40° ·100° F<br />
4.4 0 -37.8° C<br />
10 to 95%<br />
POWER INPUT<br />
95-130 VAC, 60Hz ± 2Hz, single phase<br />
190-260 VAC, 60Hz ±2Hz<br />
95-130 VAC, 50Hz ±2Hz<br />
190-260 VAC, 50Hz ±2Hz<br />
130 watts<br />
DATA TRANSMISSION<br />
crystal-controlled, selectable speed; send receive<br />
110, 150, 300 Baud<br />
KLl1-A (110 Baud)<br />
KLll-8 (150 Baud)<br />
KLl1-C (300 Baud)<br />
4.6 DEC·LlNK TERMINAL RTOl<br />
DEC-link is a low-cost, self contained data entry device which is remotely locatable.<br />
It features Teletype and EIA serial line compatibility. DEC-link offers 16<br />
unique keyboard characters which a monitoring computer may use for either numeric<br />
data or control functions-. It can display up to 12 digits of decimal data<br />
(plus decimal point) as well as status indicators.<br />
Data is entered via an integral 16-character keyboard; numeric data is displayed<br />
'on "Nixie" * TUBES. The status indicators are used to indicate no n-numeric information<br />
such as 'repeat transmission", 'computer ready", etc. Four programmable<br />
status indicators are standard on DEC-link. The KLll Control may be used<br />
with the RTOl for direct connection (see Chapter 2) or it may be used over a Bell<br />
l03A or equivalent Modem<br />
, DECLINK TERMINAL<br />
60
Change language