02.07.2013 Views

PDP11 PeripheralsHbk 1972 - Trailing-Edge

PDP11 PeripheralsHbk 1972 - Trailing-Edge

PDP11 PeripheralsHbk 1972 - Trailing-Edge

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

(A stepdown autotransformer is provided for 235-VAC operation.)<br />

Phase:<br />

Frequency:<br />

Frequency Stabi lity:<br />

Current:<br />

Power Supplies:<br />

Self Clocking:<br />

Timing Tracks:<br />

Write Lock Switches:<br />

Data Transfer Path:<br />

Shipping Weights:<br />

Number of<br />

Disks Desired<br />

1<br />

2<br />

3<br />

4<br />

5<br />

6<br />

7<br />

8<br />

Single<br />

50±2Hz or 60±2Hz<br />

0.1 Hz/sec maximum drift (A constant-frequency<br />

motor-generator set or static AC/ AC inverter<br />

should be provided for installation with unstable<br />

power sources.)<br />

For a I-disk system: Starting current, 14 Amps;<br />

Nominal current, 68 Amps.<br />

For an 8-disk system: Starting current, 81 Amps;<br />

Nominal current, 21 Amps.<br />

Lower starting currents can be realized if disks are<br />

sequenced.<br />

Self contained in cabinet with controller. Also includes<br />

line filter with each disk.<br />

Miscellaneous<br />

The RSll disk empioys self-clocking logic for reliable<br />

data recovery. Each word is logically located<br />

relative to the timing track.<br />

3 plus 3 spare (pre-recorded; can be used for data<br />

recovery if the primary timi-ng tracks are lost).<br />

Sixteen switches on each RSl1. Each switch controls<br />

the write protection for one 8-track (16,384<br />

word) segment. WLO (DCS 10) is set if a write function<br />

addresses a locked-out segment.<br />

UNIBUS (DMA); RFll is Bus Master<br />

RFll, RSll, power supplies and cabinet: 590lbs<br />

(crated), 500lbs (uncrated)<br />

RF11, RSll, RSllB, power supplies and cabinet:<br />

690lbs (crated), 600lbs (uncrated)<br />

RSllD, RSllB, RSllC, motor controllers and cabinet:<br />

690lbs (crated), 600lbs (uncrated)<br />

RSll RSllB RSllC RSllD<br />

1 0 0 0<br />

1 1 0 0<br />

1 1 0 1<br />

1 2 0 1<br />

1 2 1 1<br />

1 2 1 2<br />

1 3 1 2<br />

1 3 2 2<br />

The RSll includes a standard mounting cabinet (71-7116 in.hx30 in.dx21-11 116<br />

in.w) and 855 Power Control Unit. RSIIB designates the second disk in a cabinet,<br />

RSllC designates the third. The RFll control and all power supplies mount<br />

in the first cabinet. Other devices should not be mounted in disk cabinets. The<br />

suffix (A) designates 50-Hz power. The RSI1D includes a standard mounting cabinet<br />

and is the first disk in the second or third cabinet (cabinet has full front door;<br />

no indicator panels).<br />

80

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!