Rack Palette - Operators Manual - Strand Lighting

Console Buttons
Look Button
• Press [LOOK] then # [ENTER] to put the Channels in
a particular Look at their recorded level.
• Alternately you can scale their level using the keypad
by typing [LOOK] # @ Level [ENTER].
• Select desired Channels then press [@] [LOOK] [#]
[ENTER] to take selected Channels to their level in
specified Look and apply their values as a palette
reference.
• Press [REC] then [LOOK] then a number to record a
look.
• Press [LOOK] [#] [REC] to record a look.
• If your Slider Panel hardware is setup to control
Looks (rather than Channels), press [REC] then a
bump button to quickly record a look to a master.
• Groups in Palette are stored as Looks, even if you
don't use the levels.
• Go to Show Options to assign what Sub Master Page
will be used when this button is pressed.
83 Palette OS Operations Manual