Rack Palette - Operators Manual - Strand Lighting

Programming and Viewing Channels
Note:
To open the large popups, you can click on the [S1] through [S4] attribute
softkey bubbles with the mouse (or touch screen).
When the pop-up is displayed, the softkeys [S1] through [S12] will display:
You can use the console's softkeys directly or navigate the popup using the mouse,
the arrow keys or the wheel to select the desired value then press [ENTER] to
choose it. Pressing [REL] will close the list without changing the value. While the
popup is open, you cannot use the mouse or touchscreen to click the softkeys.
Command Line Control of Attributes
The first four softkeys that give you wheel control of the moving lights may also put
text in the command line. (We say 'may' because some parameters like Color Space,
Strobe values or Gobo Mode attributes must be adjusted by the wheel or Attribute
Pop-ups.) Here are some examples of attribute command line syntax:
o
o
[1] [S6-Color][S2-Color A Cyan] [50] [ENTER] appears as
and sets the Cyan value of Channel 1 to 50%
[1] [THRU] [10] [S2-Pan] [90] [ENTER] appears as
and will enter a hard value of 90 degrees in all of
Channels 1 through 10
o [1] [S2-Pan] [+] [90] [ENTER] appears as and
will pan Channel 1 positive 90 degrees from its current location
o
o
o
[1] [THRU] [10] [S2-Pan] [-] [90] [-] [90] [ENTER] appears as
and enters scaled pan values evenly
spaced from -90 degrees to 90 degrees for Channels 1 through 10
[1] [THRU] [10] [S2-Color Select] [1] [-] [10] [ENTER] appears as
and selects colors 1 through 10 on the
color wheel such that each Channel has a different color
[10] [THRU] [1] [S4-Gobo Index] [0] [-] [90] [ENTER] appears as
and enters scaled gobo index values
evenly spaced from -90 degrees to 90 degrees for Channels 10 through 1
(Note the reverse order)
Palette OS Operations Manual 114