Rack Palette - Operators Manual - Strand Lighting

General Information
channels in order with their respective dimmer hookup, you will want to Patch by
Channel. Patching is done in two ways; either using the command line or (more
conveniently) using the Blue Box.
Using the Command Line
To patch using the command line, first type a single Channel number followed by
[@] then the output number. Complete the command by pressing [Enter].
Using the Blue Box
Because of the very fast editing style of the Blue Box, if you are typing more than
one patch entry at a time with paperwork in front of you (or someone reading you
numbers) this method is preferred. The Patch by Channel display is already sorted
by Channel number, so entering output numbers in a sequential fashion using the
Blue Box is very fast.
Using the arrow keys, position the Blue Box in the Intensity column of the patch
display on the same line as the first channel number you have in your paperwork.
Press [EDIT] or [Insert] to open the box for editing. Type the appropriate
Patching Moving Lights to Outputs
Adding moving lights to your show is as easy as patching dimmers. Just decide on
which Channel numbers are going to be your moving lights, then change the Type
from Dimmer to whatever you have in your rig. Do this by moving the Blue Box to
the Type column and pressing [EDIT] or [Insert]:
Palette OS Operations Manual 248