Rack Palette - Operators Manual - Strand Lighting

Macros and Show Control
The main [S11] tab on the left should be set to Command showing the commands
available in the list under [S1]. Press the softkey until the desired command is
highlighted then press [S3] to insert it into the list on the right. The Edit Macro
dialog box will open.
Tip
• You can double click on any Available macro to add it to the list.
• [SHIFT] [S1] will move you backwards through the list of macros.
Any arguments (parameters) of the command will be listed. Double click on the
Value column to set an appropriate value then select OK.
You can Insert as many individual commands as you like for each macro and order
them by selecting their line and use [S5] and [S6] to move them Up and Down in
the list.
Hint
o
o
If you enter text in the Status String ([S8]), it will be written to the
Uber Status when the macro is run.
Highlight any undesired command and press [S7] to Delete it.
See Also
281 Palette OS Operations Manual