Rack Palette - Operators Manual - Strand Lighting

General Information
Show Save Options
Touching [S3] will open the Show Options dialog box. [S9] though [S12] switch you
between the different setup options.
[S1] - Show Checkpoint Time
If this value is non-zero, whenever a change to the show file has been made a
checkpoint file (*.spc) will be saved to disk at regular intervals. The Checkpoint file is
saved in the same locations as the show file. The FILE|OPEN dialog box will allow
you to open a Checkpoint file by changing the "Files of Type" combo. If you do
open a Checkpoint file, you will do a SAVEAS the first time you choose SAVE. The
Uber Status will show you when the last Checkpoint file was written.
If your system crashes or you lose power, when you recover the Checkpoint file will
be opened rather than the show file:
You will need to verify you want to continue working with the Checkpoint file or the
real show file.
[S2] - Archive on Save
If you want a history of how your show has progressed as you build it, choose to
Archive the show each time you save it. If you do this, a new *.spb file will also be
Palette OS Operations Manual 238