Rack Palette - Operators Manual - Strand Lighting

Recording and Using Looks
Deleting Cues
Deleting single cues
Position the Blue Box over the cue and press [DEL] to show the Delete Cue dialog
box:
The cue highlighted will be automatically be stuffed in the Cue Number field, but
you can type any other cue number before pressing Enter. Rolling the Wheel will
scroll through the cues in the list allowing you to read the labels to ensure you
delete the correct cue.
If you want to remove a Cue Part, see the description below.
Retain Cue Data
Sometimes this option is referred to as Delete Cue-Only. What it actually means is
that any important data in this cue will be moved to the next cue as this cue is
deleted. The exception to the rule is that it will not overwrite data that exists in the
next cue and the deleted data will be lost. You use this check box if stage
management says that the cue has been cut.
Deleting Multiple Cues
You can enter a cue range in the Cue Number edit box (i.e., 1/10) to remove
multiple cues from a Cue List. You can also preselect the cues to be deleted by
using [SHIFT] plus the [ARROW KEYS] to highlight multiple cues with the Blue Box.
Then press [DEL] to show the Delete Cues Dialog box:
Palette OS Operations Manual 188