Rack Palette - Operators Manual - Strand Lighting

General Information
[S2] - Cue List Release Time
When your Release a Playback, the values have to fade to some other value; either
their default value or the value set by some other cue list as determined by the Fade
Resolution. The Cue List Release Time determines that fade time.
[S3] - Cue List Step Time
If you are running rehearsals, you may just want to step from cue to cue ignoring the
recorded times. You have the option to set the time you step through cues using
[Step Fwd] [Step Back] keys or "[" and "]".
[S4] - Cue List Back Time
This time is used when you press [SHIFT] [BACK] or the Go Back toolbar button
to move backwards through the cue list using cue time.
[S5] - Default Cue Time
Use this text box to set the Default Cue Time. The default time is stuffed into the
Record dialog box each time new cues are written. You can easily change individual
cue times in the Record dialog box when you are writing them or just as easily
afterwards using the Blue Box.
[S6] - Loop Go Action
Use the combo box to select the action to be taken when the GO button is hit during
a loop of Cues. For an explanation of each, see Action On Go Within a Cue Loop.
[S7] - Goto Cue on Record
This option, if set, takes you to new cues you've just recorded when the Record
dialog box closes. The default for this option is on. If you are doing a lot of editing
out of sequence, you may want to turn this option off. If you do a Record Merge, the
GOTO does not happen.
[S8] - Release Channels on Record
This option, if set, automatically releases all Captured Attributes when the Record
dialog box closes. The default for this option is on. If you are building multi-step
chases with moving lights, you may not want the Channels released after recording
each and every step.
Palette OS Operations Manual 234