Rack Palette - Operators Manual - Strand Lighting

Screen Layout
View Properties
Pressing [VIEW] button or [V] displays the View dialog box.
When the dialog box opens, the Channel tab is active allowing you to use the
syntax [VIEW] [#] [ENTER] to see the properties of a specific Channel.
This is the method in which you get to View and Edit the Properties of almost
anything on the console. You can navigate this box using the Softkeys and the
display on the right hand side will change to allow you to further narrow your
selection.
When on the console, there are two very handy accelerators that speed you through
this box. You can press [VIEW] [BUMP] or [VIEW] [SELECT] to directly open the
Properties box for either a Look or a Cue List. You can also press [VIEW] [CUE] [#]
[ENTER] rather than [VIEW] [S10] [#] [ENTER] to quickly see the properties of a
specific cue. Similarly, [VIEW] [LOOK] [#] [ENTER] shows you the properties of the
specified Look.
Palette OS Operations Manual 62