Rack Palette - Operators Manual - Strand Lighting

Console Buttons
Halt/Back Button
• This button will Halt any running cues or follows on
its cue list. You can tell if a cue is running because
the Green LED on the GO button will be flashing.
• If a cue list is Halted (flashing Red LED), pressing
this button again will back up the cue list.
• Hold down [SHIFT] and press this button to go back
to the previous cue using cue time.
• If the cue list is Releasing, both the GO and the
HALT/BACK LEDs will be flashing. The release time
can be set in the Cue List's Properties.
87 Palette OS Operations Manual