Rack Palette - Operators Manual - Strand Lighting

Recording and Editing Cues
Updating Cues
Cues can be modified in the Live or Blind display modes. When you modify a cue
in the Live display, the channels you alter will be seen on both the screen and the
stage. Working in the Blind display lets you modify cues without affecting any active
stage levels.
Note:
These methods described here do not use the Load method.
Modifying Cues in the Live Display
1. Goto the cue you want to alter.
2. Select and Modify the attributes of the Channels you want to change.
3. Press [UPDT] or [U].
4. The Update dialog box will open:
5. If you have just changed values that were going up or going down in the cue (i.e.,
not tracking and not palettes) the only option will be to update the current cue.
6. Select Edits Track Forward if you want the changes to continue to track from this
cue onwards. Uncheck the box if you want the changes to revert to their old levels in
the next cue.
7. Press [ENTER] to update the selected items.
Note:
• If you change values that have been tracking, you will have the option
to change them in the current cue or in the cue they have been
tracking from (Track Back cue). You would do this for example if you
141 Palette OS Operations Manual