Rack Palette - Operators Manual - Strand Lighting

General Information
Strand Lighting ShowNet DMX
Your console can connect directly with any Strand Lighting ShowNet Network,
transmitting levels to other Strand Lighting Nodes or Strand Dimmer Racks that are
part of that Network.
Note:
ShowNet uses Broadcast communications in which IP addresses are not used.
Regardless, it is a good idea to know what Subnet you are broadcasting on.
See Control Panel - Network.
The ShowNet configuration is setup in the Patch. In the top left hand pane, you can
configure the Output Devices by clicking the [+] sign to expose the Output Device
options. By default, the DMX ports on the back of your console (USB DMX) are
mapped to Outputs 1 through 1024.
Double click on the cell to the right of ShowNet. From the drop down list, select the
number of universes that you wish to send over ShowNet. Here you can select up
to 20 universes (10240 DMX channels).
Palette OS Operations Manual 252