Rack Palette - Operators Manual - Strand Lighting

Recording and Using Looks and Groups
Note:
o
o
If you double tap [S5] (or any other softkey), it will 'solo'
Position. That is, all other check marks will clear and
Position will remain checked.
While in the main Record dialog box, if you press
[SHIFT], the Attribute button will look like
this
following:
and the softkeys will change to the
Pressing any of these changes the attribute masking without the
need to open the Attribute dialog box. You can also double tap
any attribute family to solo it.
6. Click OK (or push [Enter] on the keypad) to record the Look.
Note:
o
o
You can use the Command Line to record Looks too. Adjust your levels,
then type [LOOK] [#] [REC]. The Look will be recorded to the current
Look Page and Merge data if the look already exists. Other Sub Masters'
levels will not be included in the record operation.
If you want to modify a Look Live and use the [UPDT] button, the Look
Handle must be at 100%. See Updating Cues - Modifying Cues in the Live
Display.
211 Palette OS Operations Manual